MP 130 Manometer for Gas Detection

Impermeability manometer for gas network


Made specifically for use in gas network testing,the MP 130 is an essential instrument for gas professionals..


Measuring Detail Units:    mbar, kPa, inWg, mmHg, daPa


Measure ranges

Impermeability for gas network: -500.00 mbar ... 500.00 mbar



Piezoresistive sensor

The pressure deforms the silicon layer. This layer deformation generates a voltage at its terminates. This voltage is proportional to the pressure applied.


Main features

  • Measuring range: -500 to +500 mbar
  • Easy to use
  • Adjustable backlight
  • Hold function and min-max values
  • Selection of units
  • Adjustment certificate


MP130 Gas Manometer

Features

• Pressure measurement

• Selection of units

• Manual self-calibration

• Display of minimum and maximum values

• Configurable auto shut-off

Technical Details
Parameters Gas detection
Displays 4 line display
IP Protection IP 54
Battery Life 180 hrs
Standards 2011/65/EU RoHS II
2012/19/UE DEEE
2014/30 UE EMC
2014/35/EU Low Voltage
Power Supply 4 piles AAA LR03 1.5V
71.5mm x 34.2 mm x 147.9mm
Weight 220 g
Operating Temperature min 0.00 °C Max 50.00 °C
Storage Temperaturee min -20.00 °C max 80.00 °C
Accuracy From -20 to 20 mbar: ±0.4% of reading ±0.3 mbar
From -500 to -20 mbar and from 20 to 500 mbar: ±0.1% of reading ±0.6 mbar
Measuring Range From -500 to +500 mbar
Resolution From -20 to 20 mbar: 0.01 mbar
From -500 to -20 mbar and from 20 to 500 mbar: 0.1 mbar
Share by: