VC-220 Vibration Comparator

 High Accuracy Monitoring for Production Facilities

Techris Systems supplies the Ono Sokki VC-2200/3200 Vibration Comparator, a compact yet powerful solution for ongoing vibration and sound monitoring in production and industrial environments. Designed to deliver high accuracy and advanced functionality at a low cost, the VC-220 series supports maintenance teams with real-time condition monitoring and fault detection.


Precise Vibration & Sound Monitoring in a Compact Unit

The VC-2200/3200 utilizes a high-speed digital signal processor (DSP) to perform rapid calculations within a standard DIN-sized unit (96mm x 96mm). The inclusion of the latest TEDS (Transducer Electronic Data Sheet) function enhances setup efficiency by reducing manual input errors and speeding measurement configuration.

By processing output signals from an accelerometer, this vibration comparator simultaneously records and analyses two different frequency bands, providing a comprehensive overview of machine vibration in real-time. Data can be easily managed and reviewed via PC, making the VC-220 an all-in-one tool for detection, judgement, and data management.


Key Features:

  • Simultaneous two-band vibration measurement for detailed monitoring
  • Digital display with numerical and bar graph visualization for clear, immediate status checks
  • Analog output for integration with external systems
  • Headphone output allowing auditory verification of vibration signals
  • Comparator gate input enables vibration event extraction by syncing with PLC timing signals
  • Comparator time delay setting for precise measurement control
  • Compact DIN size (96mm x 96mm) fits easily into standard control panels


Benefits for Industrial Monitoring

  • Detect abnormal vibration patterns early to prevent costly downtime
  • Perform both visual and auditory vibration analysis simultaneously
  • Simplify monitoring with integrated data management and PC connectivity
  • Customize vibration detection timing through comparator gate input aligned with PLC signals



Applications

The VC-220 Vibration Comparator is ideal for:

  • Continuous condition monitoring in manufacturing plants
  • Predictive maintenance of rotating machinery
  • Real-time vibration analysis in production lines
  • Integration into automated control systems for vibration event detection


VC 220 Vibration Comparator

Why Choose Techris Systems for Ono Sokki Vibration Comparators?

Techris Systems is proud to be Ireland’s authorised distributor for the Ono Sokki VC-2200/3200 series. Our team offers expert advice, technical support to ensure optimal use of this advanced vibration monitoring equipment.


Contact Techris Systems Today

Improve your production facility’s maintenance strategy with the Ono Sokki VC-220 Vibration Comparator.

Contact Techris Systems now to discuss how this powerful, compact device can enhance your vibration monitoring capabilities in Ireland.

Specifications
No. of input channels 1
Number of settable bands 2
Measurement mode Rms, Peak, Maximum hold, Peak hold
Sensor sensitivity set up 1.00 x10-2 to 9.99 x102 mV/(m/s2)digital input
Input range 0.1 to 50,000 m/s2 (Setup range differs depending on the sensor sensitivity.) (example : The input range will be 2.000 to 1000 m/s2 when a sensor with 5 mV/(m/s2) sensitivity is used. )
Frequency characteristics 3 Hz to 15 kHz ±0.5 dB 1.5 Hz to 20 kHz ±3 dB (160 Hz reference value)
Input reference noise 3 Hz to 20 kHz band: 30 µVrms or less
Dynamic Range Through /AC : 80 dB or more(input voltage range x1, x2, x5) 70 dB or more(input voltage range x10, x20, x50, x100, x200, x500) THR(Through) : 1.5 Hz to 40 kHz bands AC : 1.5 Hz to 20 kHz bands
TEDS function Available to the TEDS sensor (IEEE1451.4)(Ver1.0 or later)
Current Consumption 0.2 A or less (25 °C)
Power Supply Rated DC24 V (±10 %)
Storage Temperature −5 to + 55 °C
Operating Temperature 0 to + 50 °C

Wide Range of Features

Logarithmic bar chart


Easily viewable small level vibration

Headphone volume MUTE function 


Mute function protects ears from impulsive sound when a sensor is mounted

Settings of measurement/judging conditions by one command 


Measurement conditions or judging conditions can be set by one command. Selectable from setting in a batch or each setting


You may also be interested in these